Max. Distance for DS3 and DS1 circuits

[DELL ACORD]

Ihave a a couple of DS3 and DS1 circuits coming from a SONET demarc to my 7206 router. The DS3 is currently over coax and the DS1 are over STP.

What is the max. distance allowed for both from the demarc before I drop packets for the 7206?

This is what I have currently for modules.

1 ATM network interface(s)Hardware is ENHANCED ATM PA - DS3 (45000Kbps)

4 Channelized T1/PRI port(s)

Thanks,

DTA

[stomasko]

Try checking this website below. It should be a good guidline for you.

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_module_installation_guide_chapter09186a0080105981.html#1031037

Hope this helps.

Steve