Accounting of tunnels

[john_t_mathai]

We are running a site to site VPN between 2621 and 7204. In addition users can log into our network using Cisco unity clients through the 2621and getting authenicated on RSA server placed at the 7204 end. These remote access clients will establish dynamic tunnels. Is there a way to account for these dynamic tunnels for Ex the time of session , duration of session etc on the 2621 ?

[awaheed]

Hi John,

You can setup the Cisco Works for the 7200 with the VPN Device Manager to do the Accounting for traffic: http://www.cisco.com/warp/public/cc/pd/nemnsw/vpdvmn/index.shtml

As another option to incorporate both 2600 & 7200, you might have to use Cisco Secure NT for doing the Accounting

Hope this helps,

Aamir

-=-

[kpong]

With refered to the Supported Software list of Release Notes of VDM, the supported CIsco IOS version is 12.1(11)E for c7200. Could you advise which release of IOS 12.2 can support VDM ?

Thanks,

Victor Pong

[rperera]

Has anyone responded to this message?

I am still looking for the IOS version 12.2.x that supports VDM.

Any takers!!!

[john_t_mathai]

Hi Aamir,

We have a2621 router used for site to site as well as used for remote users to come into our network. We need to know the time and when the dynamic tunnels are being created by the remote users. Basically some kind of accounting of the dynamic tunnels created by the remote users.