08-23-2006 04:22 PM - edited 03-09-2019 04:00 PM
Can some one tell me how can access the asdm to configure pix 515-e
08-23-2006 09:10 PM
Hi,
Check out this URL.
HTH
-VJ
08-24-2006 07:55 AM
Thanks,
is it necesary the step 3?
asdm image disk0:/asdmfile
what its mean disk0:/asdmfile?
08-24-2006 08:01 AM
this tells the ASA/PIX which ASDM image to use..
so asdm image flash:/asdm-511.bin
tells the device to use the ASDM v5.11 image
08-25-2006 10:23 AM
Thanks.
I'll try that.
08-26-2006 02:41 PM
I was trying asdm image command but it's doesn't exist, are there any other form to activate asdn on my pix 515-e
This is the sh ver exit:
Cisco PIX Firewall Version 6.3(5)
Cisco PIX Device Manager Version 3.0(4)
Compiled on Thu 04-Aug-05 21:40 by morlee
MexMane up 2 hours 39 mins
Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 0017.9514.5780, irq 10
1: ethernet1: address is 0017.9514.5781, irq 11
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES-AES: Disabled
Maximum Physical Interfaces: 3
Maximum Interfaces: 5
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
This PIX has a Restricted (R) license.
Thanks
08-26-2006 05:33 PM
Hi,
You're running 6.3. ASDM only works with >= 7.0.
Glen.
08-26-2006 08:29 PM
Is it better to work with 7.06?
And ASDM is better than PDM?
Thanks
08-28-2006 05:44 PM
Hi, can anyone help? i cannot install ASDM.
Previous i have asdm 1.4(7) version, after upgrade the ASA to 7.2 and ASDM 5.2 i cannot use the old version. when i want to install the latest version it will show internal error.
Do anyone facing this problem before?
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide