CBS350 Port Security

[ahmedbadr]

Hi all ,

i have CBS 350 Switch and i made Port Security Configurations to the ports with 1 mac address and all is OK ,

the Question here : i have Ports on mode trunk and 2 different Vlans I want to stick mac for one vlan only and let the other one without sticking MAC 
thanks for help 

[balaji.bandi]

check below guide - that is possible i guess as per the guide:

https://www.cisco.com/c/en/us/support/docs/smb/switches/Cisco-Business-Switching/kmgmt-2944-demonstration-port-security-default-changes.html

[ahmedbadr]

hi ,

thanks for the reply but i did this already

i want to do it in port have 2 vlans 

[balaji.bandi]

sure - have you checked the document and done the changes - tested ? what is not working now ?

[ahmedbadr]

yes sure i did 

example :

i have port gi2 have 2 vlans trunk 100 / 200

i want to make it max 1 mac address at vlan 100 

and vlan 200 any number of address 

but any one connect to this port by cable discard him
is it possible ?