Configuring X.25

[ciscomoderator]

(Note: This message was posted as part of the "Ask the Expert" Event that took place January 8- January 19. Feel free to respond to or form discussions around this question.)

Posted by: kendalepr - NETWORK ADMINISTRATOR, INTERVET

HI

WE HAVE CISCO ROUTER 1750. CURRENTLY WE TAKE "INET"

CONNECTION FROM D.O.T. WHITCH REQUIR X.25 CONFIGURATION BUT WE ARE NOT ABLE TO CONFIGURE IT

CAN ANY BODY HELP US TO CONFIGURE X.25

[bob.short]

I have provided some links to some documents on Cisco.com that you should find useful:

http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1919.htm

http://www.cisco.com/cgi-bin/Support/PSP/psp_view.pl?p=Internetworking:X25

The focus of this board is Virtual Private Networks, however, there are a number of professionals online who may be able to assist you with specific questions you have after you have gone through the online technical help.

If you don't get a suitable response, please contact your local Cisco office or our Technical Assistance Center for help with your question.

http://www.cisco.com/tac/caseopen/

Thank you for posting.

[csyeo]

1750 does not support X.25,only 1720 support X.25.