Disabling SSH

[kvc]

Hi,

I have a 1751 router with SSH feature set.

There is a default command as "ip ssh-timeout 120".

I am using this router for isdn dial-out. The call is getting disconnected at exactly 120 seconds. I increased the idle timeout but still no change.

So i felt that maybe the call is disconnecting because of the above command.

Can anyone pls tell me how to disable this command.

Thank you

[tepatel]

"no" in front of that command will remove it as documented at

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_r/fothercr/srfssh.htm#xtocid2

I don't think that the isdn line is disconnected because of that command..Just configure the idle-timeout correctly as documented in following url

http://www.cisco.com/warp/public/471/idle_timeout.html

Make sure that its applied and get reset back to maximum once the interesting traffic is passed over the ddr link..