06-29-2005 01:13 PM - edited 03-09-2019 11:42 AM
I want to setup a ftp site on a server inside my Pix 501 (not on DMZ). What lines do I need to add to the Pix to allow incoming FTP requests?
Solved! Go to Solution.
06-30-2005 07:41 AM
Hi Rounkles,
In order for outside world to connect to your inside servers or IP addresses you need to have "STATIC NAT" configured and then allow the outside world to access this servers on the outside interface for respective ports/services.
Try the following:
static (inside, outside) "NAT-IP" "FTP-server-IP"
access-list 101 permit tcp any "NAT-IP" eq ftp
access-group 101 in interface outside
HTH
MAR
06-30-2005 07:41 AM
Hi Rounkles,
In order for outside world to connect to your inside servers or IP addresses you need to have "STATIC NAT" configured and then allow the outside world to access this servers on the outside interface for respective ports/services.
Try the following:
static (inside, outside) "NAT-IP" "FTP-server-IP"
access-list 101 permit tcp any "NAT-IP" eq ftp
access-group 101 in interface outside
HTH
MAR
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide