Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I would like my Cisco 2503 redirect all Client requests coming on port 80 to a SQUID proxy.This proxy looks for the applied rules and send back the packet to 2503. Is this realisable in 2503.And how would I configure this on my Router.IOS (tm...
Hi all, I want to block few users complete internet access and allow them to access only two web sites but we only have one complete subnet for all users.10.x.x.0/24. How will I be able to do it.We already have this access-lists implemented.---------...
I would like to start prep for CCNP. I am confused as to which books to buy.As I have seen many +,- feedback for both books CISCO PRESS N SYBEX books.Which books to buy??? Should I also go for LAB rentals or some online simulations. ...
Hi all, I got a PIX 501 last week and wanna try configuring VPN client access from home to the office network.Can any one tell me how to and where to find the VPN Software and configure it.Thanks
Hi all, We have a pix501 which is doin NATing besides many oter functions. It is working fine Inside Outside. But I need access to one of the PC in the network 10.233.48.x inside from outside 10.233.49.x . Could any one let me know how to configu...
Hi Lim,You can use this command to capture dot1q tags in the capture as follows:monitor session 1 source interface gig 0/5 both monitor session 1 destination interface gig 0/4 encapsulation dot1q CheersAR
Hi Matthias, Write to licensing@cisco.com with your serial number to get the activation key and license details for the BOX from cisco. Hope this helps.HTHMAR
Hi, If you already have a Failover license then you can configure it in a failover mode Active/Standby.If you had a Restricted license then you had two options to go for Failover.Either buy just Failover or go for "Unfrestricted UR". If you have any...
