cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1178
Views
0
Helpful
3
Replies

General Firewall Question ASA5510

mmays
Level 1
Level 1

                   Once you open a port. Does that port stay open? Reason I ask I have a device and sometimes you can remote into it and some times you cant so I'm trying to eliminate the the firewall as the cause of the problem.

1 Accepted Solution

Accepted Solutions

sean_evershed
Level 7
Level 7

When troubleshooting the problem try issuing the command show local-host on the ASA. This will give you some clues as to what is happening.

http://www.cisco.com/en/US/docs/security/asa/asa72/command/reference/s4_72.html#wp1306138

View solution in original post

3 Replies 3

sean_evershed
Level 7
Level 7

When troubleshooting the problem try issuing the command show local-host on the ASA. This will give you some clues as to what is happening.

http://www.cisco.com/en/US/docs/security/asa/asa72/command/reference/s4_72.html#wp1306138

Hi,

By definition the FW will open certain ports on demand, I mean, if a TCP connection needs to open 3389 and if the FW rules allow it then it will be opened as long as necessary.

Is this issue occurring across a VPN tunnel?

Thanks!

Portu

Please rate if helpful

Sent from Cisco Technical Support Android App

mmays
Level 1
Level 1

Thanks guys I tried it this morning and I'm not having the issue anymore all I did was reboot the asa yesterday it had been up for 102 days so it must have needed a reboot to clear some stale settings or something . Thanks again.