01-11-2006 09:48 PM - edited 03-09-2019 01:35 PM
pix520 upgrade to v7 fail...
use floppy to boot ,and to v6 fail...
issue:
pixboothelper> tftp
tftp pix615.bin@218.108.252.57..............................................
Received 2598912 bytes.
Watchdog timeout failure! Please contact customer support.
...
Rebooting....
Cisco Secure PIX Firewall BIOS (3.6)
Booting Floppy
Flash=i28F640J5 @ 0x300
Reading 5345792 bytes of image from flash.
...
01-13-2006 05:03 AM
Hello, unfortunately the PIX520 is not supported by software version 7.0. Have a look at the release notes at
http://www.cisco.com/en/US/products/sw/secursw/ps2120/prod_release_note09186a0080546bbd.html#wp31825
Hope this answers your question! PLease rate all posts.
Martin
01-16-2006 12:25 AM
thanks Martin,
I open the PIX ,and "jump line" on Flash Card, than OK...
04-05-2006 12:42 AM
Hi, i am having the same problem.
What do you mean with "jump line" on Flash Card ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide