08-24-2004 02:06 AM - edited 03-09-2019 08:34 AM
Hi all,
i installed IDS MC and SecMon over a new server and now i want import all configuration ( user, device, config...) from the old server to new one.
What i have to do??
Thanks
Marco
Solved! Go to Solution.
08-24-2004 11:04 AM
the easiest way to do this, is to just bring up your fancy, new vms server, and then 'Discover' the sensors with this new box. once you have discovered the sensor, then 'Import' it into SecMon.
all the configs are saved on the sensor, so everything should come across, i.e., signature settings, filters, etc.
after you build your new server, make sure you update ids mc to the latest sigs.
hope this helps,
chris
08-24-2004 11:04 AM
the easiest way to do this, is to just bring up your fancy, new vms server, and then 'Discover' the sensors with this new box. once you have discovered the sensor, then 'Import' it into SecMon.
all the configs are saved on the sensor, so everything should come across, i.e., signature settings, filters, etc.
after you build your new server, make sure you update ids mc to the latest sigs.
hope this helps,
chris
08-25-2004 01:06 AM
Thanks you very much Chris!!
Bye
Marco
08-25-2004 06:26 AM
I have the same issue, but I don't understand what do you mean by "Discover the sensors" how aould you do that through the VMS?
thank you
08-25-2004 07:28 AM
when you add the sensor, don't add it manually. check the 'discover settings' box. see link below:
thanks,
chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide