03-15-2007 05:46 PM - edited 03-09-2019 05:37 PM
Hi All,
I have a LAN-2-LAN VPN connection back to HO from a remote site. This router also has some NAT's defined to allow access to RDP from the internet etc.
Is there a way to also allow RDP using the internal address of the server once the NAT is in place?? Currently I can only access the server using RDP via its public address.
thanks in advance
ip nat inside source static tcp 172.28.9.1 3389 interface Dialer0 3389
thanks
Solved! Go to Solution.
03-16-2007 02:05 AM
Hi Glen,
That would work, and for this you have to use PBR ( Policy Based Routing). Assuming the remote end subnet is 192.168.1.0/24 .
Here are the steps you need to follow :
1: Create an access-list to identify the traffic :
access-list 101 permit ip host 172.28.9.1 192.168.1.0 0.0.0.255
2: Create a loopback interface :
int loopback 1
ip address 1.1.1.1 255.255.255.0
exit
3: Create a route-map for PBR :
route-map pol_nat permit 10
match ip address 101
set ip next-hop 1.1.1.2
exit
4: Apply the route map to the LAN interface :
int fasteth0/0
ip policy route-map pol_nat
exit
That should do it !!
*Please rate if helped.
-Kanishka
03-16-2007 02:05 AM
Hi Glen,
That would work, and for this you have to use PBR ( Policy Based Routing). Assuming the remote end subnet is 192.168.1.0/24 .
Here are the steps you need to follow :
1: Create an access-list to identify the traffic :
access-list 101 permit ip host 172.28.9.1 192.168.1.0 0.0.0.255
2: Create a loopback interface :
int loopback 1
ip address 1.1.1.1 255.255.255.0
exit
3: Create a route-map for PBR :
route-map pol_nat permit 10
match ip address 101
set ip next-hop 1.1.1.2
exit
4: Apply the route map to the LAN interface :
int fasteth0/0
ip policy route-map pol_nat
exit
That should do it !!
*Please rate if helped.
-Kanishka
03-18-2007 04:50 PM
Thanks very much Kanishka, much appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide