07-29-2002 06:31 AM - edited 03-08-2019 11:44 PM
Hi all ;
I need permit access on telnet and other protocols to external host ( 148.223.170.39 ) from my internal lan ( 172.16.133.0 )
The access by my server proxy works perfectly to Internet. ( http, ftp, https )
I have Pix 5.3 and CSPM 2.3.
The configuration of the CSPM is the following :
global (outside) 1 148.235.170.78 netmask 255.255.255.255
nat (inside ) 1 172.16.133.31 netmask 255.255.255.255 ( proxy server )
nat (inside ) 1 172.16.133.0 netmask 255.255.255.0
access-list CSM-acl-inside permit tcp 172.16.133.0 255.255.255.0 host 148.223.170.39 eq 23
I put to debug the pix but I do not see that open or close connections to the external host.
I am making something bad?
Thank you in advance for your help.
07-29-2002 06:54 AM
How do you apply the access-list?
(There should be a line "access-group CSM-acl-inside ...")
07-29-2002 09:34 AM
Hi
Yes, I forget to mention it :
"access-group CSM-acl-inside-V1 in interface inside"
I remember to you that the CSPM apply the rules. I review the configuration that it generates .
Thanks a lot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide