Hi All
I have configured VPN between hub and spoke and VPN connection is good. Ping to the lan interfaces of hub and spoke is good, but ping to the pc`s in the lan side is bad. That is there is lt of packet loss.
What can be the problem? Can some body help on this.
Below is the detials. I have attached the Hub router config, log details and VPN lab test Network setup.
Will there be any problem if the Gigainterface duplex is Half-duplex, 10Mb/s, media type is T.
Hub is Cisco ISR 2821 IOS 12.3(11)T3-advancedsecurityK9
Hub GE0/1 --- a.b.c.40
Hub GE0/0 --- 172.29.160.1
Hub lanpc --- 172.29.160.2
spoke1 FE0/1 --- a.b.c.38
spoke1 FE0/0 --- 172.29.162.1
spoke1 lanpc --- 172.29.162.2
spoke2 FE0/1 --- a.b.c.39
spoke2 FE0/0 --- 172.29.161.1
spoke2 lanpc --- 172.29.161.2
The VPN between hub==spoke1 and hub==spoke2 is good.
The ping from hubbox to spoke1box interface FE0/0(172.29.162.1) is good.
The ping from hubbox to spoke2box interface FE0/0(172.29.161.1) is good.
But ping from hub lanpc(172.29.160.2) to spoke1 lanpc (172.29.162.2) is bad,
that is there is lot of packet loss.
Same way the ping from hub lanpc(172.29.160.2) to spoke2 lanpc (172.29.161.2) is bad,
that is there is lot of packet loss.
Same problem is there for vice versa, ping from spoke1 lanpc to hub lanpc is bad, lot of packet loss.
ping from spoke2 lanpc to hub lanpc is bad, lot of packet loss.
-Rcp
