10-19-2018 03:08 PM - edited 03-10-2019 01:06 AM
does someone knows what is the detail information of privilege levels 0 to 15?
what does privilege level 3?
what does privilege level 7?
what does privilege level 15?
I am looking for the most basic level that permits show commands such as show ip route, show ip bgp summary, show cdp neighbors
Thanks
Solved! Go to Solution.
10-19-2018 03:22 PM
10-19-2018 09:10 PM - edited 10-19-2018 09:11 PM
Hi
Privilege 15 means admin with full rights. Privilege 1 is user-level command only. Everything in between is up to you to configure on the switch to device what privilege can access what command. If you assign privilege 4 and commands for this privilege aren't defined, ios will go to lower privileve until it get one configured. This means, if you didn't configure any privilege and assign level 4 to a user, it will check 3 then 2 and finally 1 and assign level 1 commands to your user.
If you had configured 3, then commands 3 were assigned.
Privilege 0 has only few command.
Take a look here:
https://learningnetwork.cisco.com/docs/DOC-15878
https://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-access-control-system-tacacs-/23383-showrun.html
10-19-2018 03:22 PM
10-19-2018 03:26 PM
alex it looks like the URL that you just provided is broken
Thanks
10-19-2018 03:46 PM
10-19-2018 03:47 PM
10-19-2018 09:10 PM - edited 10-19-2018 09:11 PM
Hi
Privilege 15 means admin with full rights. Privilege 1 is user-level command only. Everything in between is up to you to configure on the switch to device what privilege can access what command. If you assign privilege 4 and commands for this privilege aren't defined, ios will go to lower privileve until it get one configured. This means, if you didn't configure any privilege and assign level 4 to a user, it will check 3 then 2 and finally 1 and assign level 1 commands to your user.
If you had configured 3, then commands 3 were assigned.
Privilege 0 has only few command.
Take a look here:
https://learningnetwork.cisco.com/docs/DOC-15878
https://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-access-control-system-tacacs-/23383-showrun.html
10-20-2018 07:52 AM
Thank you !
10-20-2018 08:49 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide