03-09-2006
09:21 AM
- last edited on
03-25-2019
05:07 PM
by
ciscomoderator
Are we missing something?
When adding 2 additional GIG cards in a pix 535 running ver 6.3.3 into slots 0 & 1, we noticed that all traffic thru the pix had stopped. In other words no traffic was traversing the pix. On the internal NIC we had recieve traffic but no transmit (internal) and external we had recieve traffic but no transmit (to internet) traffic. I have included our sh version of the pix. Is there a bug of something we may have missed that may be causing this indication? The licensing looks to be in order.
Thanks, Mike G.
pix# sh ver
Cisco PIX Firewall Version 6.3(3)
Cisco PIX Device Manager Version 3.0(1)
Compiled on Wed 13-Aug-03 13:55 by morlee
fwlucpix01 up 7 days 9 hours
Hardware: PIX-535, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash DA28F320J5 @ 0xfffd8000, 128KB
0: gb-ethernet0: address is 000e.0c34.562a, irq 12
1: gb-ethernet1: address is 000e.0c34.5f91, irq 255
2: ethernet0: address is 000d.88ee.7344, irq 15
3: ethernet1: address is 000d.88ee.7345, irq 12
4: ethernet2: address is 000d.88ee.7346, irq 15
5: ethernet3: address is 000d.88ee.7347, irq 12
6: ethernet4: address is 0002.b3ef.7045, irq 12
7: ethernet5: address is 0002.b3ef.705c, irq 15
Licensed Features:
Failover: Enabled
VPN-DES: Enabled
VPN-3DES-AES: Disabled
Maximum Physical Interfaces: 10
Maximum Interfaces: 24
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
03-10-2006 08:59 AM
I have not worked with the 535, but it could be that when you added the Gigabit interfaces, since they became Interfaces 0 and 1, the configuration for the existing Interfaces may have either been deleted, or moved onto the new interfaces. It would help if you posted your (cleaned) config to see if this is what happened, or if there may be something else going on.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide