Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am building out 2 virtual firewalls using contexts in an active/active F/O pair, and would like to know if it is necessary to assign at least one interface to the admin context?My other contexts will have outside, inside, DMZ and stateful F/O inter...
Puzzled???Anyone know why the physical interface of the vlan and the vlan interface show differnt utilizations? For instance the physical interface shows 60% utilization and the vlan interface is double that.Thanks in advanceMike G.
Are we missing something?When adding 2 additional GIG cards in a pix 535 running ver 6.3.3 into slots 0 & 1, we noticed that all traffic thru the pix had stopped. In other words no traffic was traversing the pix. On the internal NIC we had recieve ...
I am testing SSH version 1 connections into a 515 running 6.3.3 I have usernames setup within the pix and ssh allowed connections via ip address. Ths problem is I can only connect to the PIX via the username "pix" and it will only allow one connect...
One more thing ... I may be wrong on the image # There is an issue with the image being to big and you would need to tftp to the AP. It is in the release notes.
Thanks Lisa - I'm still unclear ... when you say that you must have the same native vlan (say vlan 1) trunked through the campus. So both WLSM's will use the same vlan for control traffic to the AP's???I have read this document several times but doe...
Hi please follow this link for answer to your questions.http://www.cisco.com/en/US/partner/tech/tk722/tk809/technologies_q_and_a_item09186a00804d4421.shtml
