Witch version of SNMP for PIX535 in 6.3.4?

[croue]

Hi,

Whitch version of SNMP is used by default in the PIX 535 running with software 6.3.4?

Is it the version 3?

[Patrick Iseli]

It is still SNMP Version 1, this will be changed in the PIX OS 7.0.

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801cd841.html#wp1191051

sincerely

Patrick

[croue]

Hi Patrick,

Sorry, but I didn't find any information regarding the version 1 used in 6.3.

Did you find it in a particular command description?

[Patrick Iseli]

You are right it is not clearly mentioned in the documentation but there are no commands for other versions than SNMP version 1 for the PIX OS 6.3.x.

And in the datasheet of PIX OS 7.0 is mentioned:

Introduces support for SNMPv2c, providing increased visibility into the status of Cisco PIX Security Appliances.

To me this means that there is no other support than SNMP version 1 in the current relase 6.3.x.

Cisco PIX Security Appliance Software Version 7.0 datasheet.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_data_sheet0900aecd80225ae1.html

sincerely

Patrick