Hi! I'm trying to configure the network-clock input source ptp in Cisco ASR901, but is not available. I configure the PTP Slave just need complet the ptp as input source, like ASR920.
CISCO-ASR901-01#show run | s ptp
ptp clock ordinary domain 0
clock-port ASR901_Site01 slave
transport ipv4 unicast interface Lo1 negotiation
clock source 10.10.0.1
clock source 10.10.10.10 1
CISCO-ASR901-01(config)#network-clock input-source 10 ?
controller Select the controller that should source the clock
external External Interface (BITS/SSU/GPS)
interface Specify Ethernet, Sonet or ToP interface
I only see the source like: Controller, External and interface, not PTP option like IOS XE:
CISCO-ASR920-01(config)#network-clock input-source 100 ?
controller Select the controller that should source the clock
external External Interface (BITS/SSU/GPS)
interface Specify Ethernet, Sonet or ToP interface
ptp Specify a PTP clock source
Thanks in advanced.