Hello.
I'm in a process to setup BNG on a Cisco ASR 9903. I have EVPN up and running and working.
Here is what i want to achive:
We base our username on circuit-id, in this case: cisco-access-1-1-1-p31 (p31 is port: GigabitEthernet0/0/31 - cisco-access-1-1-1 is hostname).
I use DHCP as discover method, for some Service Providers they are delivering the DHCP server through their VRF's and for few of them we are doing the DHCP Server in our own.Management VRF. In our network we have multiple service providers that delivers services trough our network, they are in different VRF's.
I have not found any configuration examples for this setup? I have tried and not figures this out. Do the Radius server send only a new Dynamic template for eache Service Provider or does it need to send the hole policy-map?
I have attached a drawing here to explained some more. There are a physical loop on the ASR 9903 for handling off the EVPN to BNG.
