i have a 10 G interface for Core Device (Catalyst 6880), i want to check if everything ok on this Interface , but theres hight Output Drop Number i dont know if this still normal in compare with all Output Packets ?? , this interface is connected with Cisco UBR 10012.
i restored the interface Counter before 3 Weeks and heres the Show interface command for this Interface .
the second question what mean these pause input Number??
# Show interface Te5
line protocol is up (connected) Hardware is C6k 10000Mb 802.3, MTU 1500 bytes, BW 10000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 64/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 10Gb/s, media type is 10Gbase-SR input flow-control is on, output flow-control is off Clock mode is auto ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters 3w3d Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 6740061 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 431000 bits/sec, 112 packets/sec 5 minute output rate 2515016000 bits/sec, 241906 packets/sec 288338483 packets input, 141872230298 bytes, 0 no buffer Received 31 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 177 pause input 0 input packets with dribble condition detected 546855141188 packets output, 722892128881803 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out
Listen: https://smarturl.it/CCRS8E39 Follow us: twitter.com/CiscoChampion5G and Wi-Fi 6, the next generation of mobile wireless technologies are here! But what does that mean? Where and how is 5G being deployed? What is Wi-Fi 6? Who’s on first? ...
loadbalancing is one of the more complex items in hardware forwarding. of course we have talked about it many years on cisco live (id 2904) with ever incrementing more detail. and there is the support forum article on loadbalancing.
IntroductionArchitecture Building BlocksIOS-XR RoutersConfigurationPerformance VerificationOptimizationStrict timerSome more verificationThe CollectorInfluxDBDatabase statistics and HealthClosing comments
This document was written in collaboration with:
IOS-XR MPLS TE Auto Tunnel Backup Bandwidth Protection Current Implementation of MPLS TE Auto Tunnel BackupPotential issue with current implementation of MPLS TE auto tunnel backupEnhancement to MPLS TE auto backup in IOS XR 7.5.1Supported HardwareConfig ...
we are trying to monitor the Cisco 9148s SFP status, and have get the Sensor's dBm value from the CISCO-ENTITY-SENSOR-MIB table, meanwile , it has an Index value like "30000xxxx",such as "30001773", entsensorValueTable but we can't sure how to l...