RIPv2 support on 10GbE IO card

[Marcel Imrich]

Hi.

Anyone knows if this is possible with "DCM-IO-PROC" card? I know there is quite old known limitation that dynamic routing (anycast support)

is possible only on Port1/3 (DCM-GBE-MK1) starting with ver.08.09.

Thanks.

Marcel

[kusridha]

Marcel

It is supported if the DCM-IO-PROC card is configured as GbE - MK2. The DCM-IO-PROC can be configured as either GbE - MK2 or 10 GbE card.

It is supported in the same way as in GbE MK1 card. The limitation still remains.

Regards

Kumar