ATTENTION: We are currently working an issue with posting. Thank you for your patience while we work on a resolution.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1251
Views
0
Helpful
1
Replies

SCE 2020.

ciscobernard
Level 1
Level 1

Dears,

Is it possible on Cisco SCE 2020, in a mobile operator environement, to differentiate and do the below, based on deep packet inspection:

1. Wapv1 and Wapv2 protocols, and make rating and charging based on the URL analysis?

2. MMS URL analysis and charging?

3. 3GPP interfaces as Gy or Gx interfaces to integrate with the charging systems?

4. Are there any other equipments needed for the above?

Thanks.

1 Reply 1

usujlana
Cisco Employee
Cisco Employee

for 1 & 2 you need to go through the latest Protocol Pack to see if those are supported :

http://www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/protocol_ref_guide/protocol_ref_guide.html

3. 3GPP interfaces as Gy or Gx interfaces to integrate with the charging systems?

[Upinder]

For this SCE has a feature called as diameter that is specially designed for Mobile env for intergating with Gy & Gx :

http://www.cisco.com/en/US/partner/docs/cable/serv_exch/serv_control/broadband_app/rel36x/mobile_sol/01_mobile_intro.html

Note the placement of the SCE in the enviroment is very importatant and its required that the SCE should only see IP.

4. Are there any other equipments needed for the above?

[Upinder]

SCE 8K for sure can do it , i think SCE 2k can also do so , check on CCO

Thanks,

~upinder sujlana (usujlana)