cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
203
Views
0
Helpful
0
Replies
Highlighted
Beginner

T3 card SM-X-1T3/E3 err messages

Have a CISCO2951/K9 router with a T3 card SM-X-1T3/E3; router goes down frequently and am wondering if these error messages indicate a possible card or router failure?  Have not been able to locate much info the log messages.

 

from show platform: 

MSI Interrupt info:
===================
MSI 0, name: wic_mbrd_hdlc_intr, hdlr 0x468D054, cnt 0, ctx 0x0, slot 0, IO_Controller, NETIO, nu mber 0
MSI 1, name: wic_mbrd_hdlc_intr, hdlr 0x468D054, cnt 0, ctx 0x1, slot 0, IO_Controller, NETIO, nu mber 1
MSI 2, name: wic_mbrd_hdlc_intr, hdlr 0x468D054, cnt 0, ctx 0x2, slot 0, IO_Controller, NETIO, nu mber 2
MSI 3, name: wic_mbrd_hdlc_intr, hdlr 0x468D054, cnt 0, ctx 0x3, slot 0, IO_Controller, NETIO, nu mber 3
MSI 4, name: wic_mbrd_hdlc_intr, hdlr 0x468D054, cnt 0, ctx 0x4, slot 0, IO_Controller, NETIO, nu mber 4
MSI 5, name: wic_mbrd_hdlc_intr, hdlr 0x468D054, cnt 0, ctx 0x5, slot 0, IO_Controller, NETIO, nu mber 5
MSI 6, name: wic_mbrd_hdlc_intr, hdlr 0x468D054, cnt 0, ctx 0x6, slot 0, IO_Controller, NETIO, nu mber 6
MSI 7, name: wic_mbrd_hdlc_intr, hdlr 0x468D054, cnt 0, ctx 0x7, slot 0, IO_Controller, NETIO, nu mber 7
MSI 27, name: i2c intr handler, hdlr 0x4906214, cnt 0, ctx 0x0, slot 0, IO_Controller, NETIO, num ber 27
MSI 28, name: wic_mbrd_scc_netio_, hdlr 0x468CC3C, cnt 0, ctx 0x0, slot 0, IO_Controller, NETIO, number 28
MSI 32, name: wic_mbrd_hdlc_error, hdlr 0x468CCF4, cnt 0, ctx 0x0, slot 0, IO_Controller, ERR, nu mber 0
MSI 33, name: wic_mbrd_hdlc_error, hdlr 0x468CCF4, cnt 0, ctx 0x1, slot 0, IO_Controller, ERR, nu mber 1
MSI 34, name: wic_mbrd_hdlc_error, hdlr 0x468CCF4, cnt 0, ctx 0x2, slot 0, IO_Controller, ERR, nu mber 2
MSI 35, name: wic_mbrd_hdlc_error, hdlr 0x468CCF4, cnt 0, ctx 0x3, slot 0, IO_Controller, ERR, nu mber 3
MSI 36, name: wic_mbrd_hdlc_error, hdlr 0x468CCF4, cnt 0, ctx 0x4, slot 0, IO_Controller, ERR, nu mber 4
MSI 37, name: wic_mbrd_hdlc_error, hdlr 0x468CCF4, cnt 0, ctx 0x5, slot 0, IO_Controller, ERR, nu mber 5
MSI 38, name: wic_mbrd_hdlc_error, hdlr 0x468CCF4, cnt 0, ctx 0x6, slot 0, IO_Controller, ERR, nu mber 6
MSI 39, name: wic_mbrd_hdlc_error, hdlr 0x468CCF4, cnt 0, ctx 0x7, slot 0, IO_Controller, ERR, nu mber 7
MSI 52, name: Hsib Error Monitor , hdlr 0x490BBD4, cnt 0, ctx 0x0, slot 0, IO_Controller, ERR, nu mber 20
MSI 60, name: wic_mbrd_scc_mgmt_i, hdlr 0x468C580, cnt 0, ctx 0x0, slot 0, IO_Controller, MGMT, n umber 28
MSI 61, name: tdm_exception_handl, hdlr 0x4CF1B60, cnt 0, ctx 0xEC8A0000, slot 0, IO_Controller, ERR, number 29
MSI 62, name: GPIO interrupt hand, hdlr 0x48FD188, cnt 0, ctx 0xEC900200, slot 0, IO_Controller, ERR, number 30

Debug counters/Info:
unreg_msi_int_cnt 0

 

-- From the Logs ----

 

*Jul 11 12:11:23.033: sm_1t3e3_ctrlr_report_handler: 0x2
*Jul 11 12:11:23.309: %CONTROLLER-5-UPDOWN: Controller T3 1/0, changed state to up
*Jul 11 12:11:24.189: sm_1t3e3_ctrlr_report_handler: 0x1
*Jul 11 12:11:24.309: %CONTROLLER-5-UPDOWN: Controller T3 1/0, changed state to down
*Jul 11 12:11:25.441: sm_1t3e3_ctrlr_report_handler: 0x2
*Jul 11 12:11:26.309: %CONTROLLER-5-UPDOWN: Controller T3 1/0, changed state to up
*Jul 11 12:11:28.310: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
*Jul 11 12:11:39.311: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
*Jul 11 12:11:59.312: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
*Jul 11 12:12:10.925: sm_1t3e3_ctrlr_report_handler: 0x1
*Jul 11 12:12:11.313: %CONTROLLER-5-UPDOWN: Controller T3 1/0, changed state to down
*Jul 11 12:12:12.761: sm_1t3e3_ctrlr_report_handler: 0x2
*Jul 11 12:12:13.313: %LINK-3-UPDOWN: Interface Serial1/0, changed state to down

 

 

0 REPLIES 0