Camera Archiving With Motion Detection

[csco10971283]

Dears,

I configured recording with motion detection on VSOM 6.3.2 but I think the recording is not working properly.

I can't find all the actions happened in the archiving.

Can anybody tell me step-by-step configuration for the archiving with motion detection.

Thanks,

Ahmed Ossama

[csco10971283]

Dears,

Hope any one can reply to me...

Regards,

Ahmed Ossama

[jfiranzi]

Hello Ahmed,

Thank you for posting your question on Cisco Support Community forums.  A colleague of mine posted an excellent guide to creating motion archives which you may find in the Documents section of CSC (direct link posted below.)

https://supportforums.cisco.com/docs/DOC-15088

As a rule, for the 24xx, 25xx and 26xx Cisco cameras, it is best to configure the smallest motion windows possible which still guarantee coverage of the area of interest (middle of a door for example rather than the entire wall containing the door.)  You are permitted up to 4 motion windows per camera on the above mentioned models.

I hope that helps,

Jim