06-05-2012 04:46 PM
Hello all,
I've got a Cisco 2900 PTZ. Through VSOM I can pan/tilt but I have no zoom capibility.
On the camera configuration I have the camera type set to: Cisco 2900 Series IP Camera
To compound the issue... I can not access the web interface of the camera. Nor can I SSH to the camera.
I think a factory reset is my best option. However the user guide only gives instructions for resetting the camera through the web interface...
Does anyone know if I will find a reset button on the interrior of the camera? (Before I setup a very tall ladder)
Any other troubleshooting ideas?
Thanks!
-Mike
06-06-2012 12:44 AM
Hi,
I had a similar problem, but I solved it with the new firmware. Firmware can updated from VSM Server.
06-06-2012 07:56 AM
Thanks for the idea Muravjev!
I can now sucessfully zoom through VSOM.
I am still unable to access the web interface of the camera directly... However this isn't as critical now. If anyone has a suggestion I'd appreciate it.
Thanks,
-Mike
06-17-2012 07:38 AM
Hi,
Check the PTZ enable or not on vsom , you have joystick for this camera?
BR
06-18-2012 09:06 AM
Thanks ahmadibech -
However Muravjev's suggestion to upgrade the firmware already resolved the problem.
This issue is resolved.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide