Cisco Physical Security MultiService Platform - Installation from scratch.

[Fazal E Rasool Khan]

Hello Experts, 

I am working for Cisco NVR (Cisco Physical Security MultiService Platform) which was purchase around 5 years ago and due to some reason it could not be installed at that time. Basically i am a network guy and dont have much experience with Cisco Cameras and NVR (Cisco Physical Security MultiService Platform). I will be thankful if anyone support with required documents how this installation should be done from scratch. 

Below is that attached Bill of Quantities. 

Thanks.

SN	Description	Qty
1	Cisco VR SD IP Video Surveillance Dome, 3.3-12mm, D/N, Smkd	234
2	SMARTNET 8X5XNBD Cisco VR SD IP Video Surveillance Dome,	234
3	Cisco 2600 IP Camera, Full Resolution, Day/Night	63
4	Cisco IP Camera Fujinon 3-8mm Varifocal Lens	63
5	SMARTNET 8X5XNBD Cisco 2600 IP Camera, Full Resolution, D	63
6	Cisco Video Surveillance 2916 IP Camera, Indoor PTZ In-Ceiling Dome, 27X, Smoked Bubble, PAL	2
7	SMARTNET 8X5XNBD Cisco VR SD IP Video Surveillance Dome,	2
8	Cisco Video Surveillance 2935 IP Camera, Outdoor PTZ Pendant, 35X, Clear Bubble, PAL	5
9	SMARTNET 8X5XNBD Cisco 2935 IP Camera, Full Resolution	5
10	CIVS 1 Cisco Device Stream Connect License for Media Server	304
11	CIVS-OM Operations Manager v6.3 SW Lic. w/ SmartSearch Spare	1
12	SW APP SUPP CIVS-OM Operation Mgr	1
13	MSP 1-RU Cisco Physical Security MultiService Platform Assy.	1
14	1TB SATA Drive for CIVS-MSP	1
15	CIVS-VSM Video Surveillance Manager v6.3 SW Mfg Image	1
16	CIVS C16 Power Cable Europe	1
17	SMARTNET 8X5XNBD MSP 1-RU Cisco Physi	1
18	CIVS-VM Virtual Matrix v6.3 Software License Spare	1
19	Cisco VS Virtual Matrix Client License, 1 Client	5
20	SW APP SUPP  CIVS-VM-1DFL	1
21	SW APP SUPP CIVS-VM Virtual Matrix v6.3 Software Lic	5
22	4RU w/Motherboard;1 CPU;RAID;Pwr Suppl;NO Drives;NO Options	6
23	1TB SATA Drive for CIVS-MSP	132
24	Redundant  900W Power Supply  For CIVS-MSP 2RU,4RU	6
25	CIVS C 16 Power Cable Europe	6
26	CIVS-VSM Video Surveillance Manager v6.3 SW Mfg Image	6
27	CIVS-MS Media Server v6.3 Software Lic. with Hardware	6
28	CIVS C 16 Power Cable Europe	6
29	SMARTNET 8X5XNBD 4RU MSP Assembly	6
30	SW APP SUPP CIVS-MS Media Server v6.3 Software Licen	6

[Scott Olsen]

Hi Fazal,

Sorry to hear you're stuck in such a predicament.  A majority of that hardware is End of Life / End of Sale and cannot even be supported.  I strongly suggest you reach out to your local Cisco representative to see what your options are moving forward.

If you must implement the hardware you have identified, you'll probably want to begin with the documentation outlined here:

https://www.cisco.com/c/en/us/products/collateral/physical-security/video-surveillance-manager/data_sheet_c78-490683.html?cachemode=refresh

https://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/network/vsm/release_notes/6_3/vsm_rn_63.html

http://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/network/vsm/6_3/install_upgrade/vsm_install_upgrade.html

http://www.cisco.com/c/en/us/support/physical-security/video-surveillance-media-server-software/tsd-products-support-series-home.html

Again, if you are deploying this net new... I would definitely recommend going with a more modern version of software:

http://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/network/vsm/roadmap/vsm_7_roadmap.html#pgfId-48992

Best of luck!