11-06-2010 05:57 PM
Hi - and thanks in advance for your help.
There's something I'm doing wrong with the basic configuration of this older PIX 501, and I don't know what it is... It seems to me it should be working, and indeed it was working for a short while, and then stopped working inexplicably.
Now I can't even ping any IP outside, not even the next hop --- and so I was hoping someone could look at the "show run" and tell me what the hell is missing before I rip my hair out.
Here's the show run, and thanks again for your help -
(PS1 - the real outside IP was replaced by A.B.C.D, and the next hop by A.B.C.E)
-------------------
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 7qqHBeDL51oM/AKL encrypted
passwd 8WAU9VgeZbq1ZOeK encrypted
hostname fire
domain-name xxx.pri
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
no fixup protocol sip 5060
no fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside A.B.C.D 255.255.255.252
ip address inside 192.168.6.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) A.B.C.D 192.168.6.9 netmask 255.255.255.255 0 0
conduit permit tcp host A.B.C.D eq pptp any
conduit permit icmp any any
route outside 0.0.0.0 0.0.0.0 A.B.C.E 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 192.168.6.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
banner exec Private Network - Buzz off!
banner login Private Network - No Access!
Cryptochecksum:488eebb0a68315fabc877297138c0e44
: end
fire#
11-08-2010 01:51 AM
Thank you for your question. This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product. Please post your question in the Cisco NetPro forums located here:
- Security and Surveillance ----> Security Forum http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Security_discussion
This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.
THANKS
11-08-2010 05:32 AM
Thank you for your reply - I have looked at your link, which points here:
https://supportforums.cisco.com/index.jspa
...and wasn't sure of the exact forum you wanted me to post in:
1) I did not see a "Security & surveillance" forum, I saw a "security" forum - Is that what you mean?
2) The sub-division of the "security" forum do not seem to contain a "NetPro" forum or "Elite/Classic" listed -
I simply don't know where you are telling me I should be posting
Thanks for clarifying.
11-08-2010 07:56 AM
Hello Philippe -- Try: https://supportforums.cisco.com/community/netpro/security/physical-security .
Thanks,
Stephanie Reaves
Cisco Small Business
11-08-2010 08:30 AM
Thanks And sorry for the mistake -
11-08-2010 09:12 AM
No problem and no mistake. This is a LARGE community and the taxonomy isn't always simple. We hope you'll visit again soon with a post about a Small Business product!
Thank YOU for being a Cisco customer.
Stephanie Reaves
Cisco Small Business
11-08-2010 10:42 AM
Hello,
I have moved this thread into the area that Stephanie suggested, https://supportforums.cisco.com/community/netpro/security/physical-security and here is the other post that Philippe started there: https://supportforums.cisco.com/message/3220759#3220759 posted there.
Regards,
Cindy Toy
Cisco Small Business
Community Manager
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide