RMS-LMR Stop channel mixing after Reboot !

[haider.rizwan]

Hey,

I am facing problem in IPICS and RMS-LMR network. Whenever, my RMS-LMR gets rebooted then it stops channel mixing and DS0 lines goes not engage any more. I manually disable and enable VTG and Channels but it deos not helps....

What should i do so that if my RMS-LMR even shutdown and reboot then it works as it should be !

So far, the solution is: I manually delete channels and re-create them, after this they starts working which is not a solution !

please help me !!! Thanks a lot

Rizwan Haider Siddiqui

rizwan.haider@msn.com             Cell:    +92-33-44-22-22-39

[John Gillich · Accepted solution]

Rizwan,

The IPICS server has a setting under the administration tab to do an update with the RMS every 10 minutes by default. If you are loosing the DSO loopbacks then you may need to make sure you have saved the config on the router. What version of IOS are you using?

Do a show flash to get your IOS. It should be

Also make sure you have this statement in your router.

boot-start-marker

boot system flash c2801-adventerprisek9-mz.151-4.M1.bin

boot-end-marker

John

[haider.rizwan]

it works with charms !!!

thanks Mr. John !