02-27-2013 03:16 PM - edited 03-10-2019 08:08 PM
I use ACS 5.3.0.40.8 with TACACS+ servicing Device AAA and RADIUS servicing the Cisco Wireless environment for AD user access. How can I implement 802.1x with the current RADIUS implementation with hindering current wireless users or am I hindered due to the EAP-GTC in use with PEAP via RADIUS?
Sent from Cisco Technical Support iPad App
Solved! Go to Solution.
02-28-2013 04:11 AM
Generally speaking the EAP type is determined by the supplicant and the server
so if you have wireless client configured for EAP TLS and wired clients configured
for PEAP MSCHAP v2 , you shouldn't have any problem if you have an Access
Service handling RADIUS and having both types of EAP enabled and the identity
policy as well as the authorization is straight to the same target and level of access.
Cheers
-------------------------------------------------------------------------------------------------------------------------
Please Don't Forget to rate correct answers
02-28-2013 04:11 AM
Generally speaking the EAP type is determined by the supplicant and the server
so if you have wireless client configured for EAP TLS and wired clients configured
for PEAP MSCHAP v2 , you shouldn't have any problem if you have an Access
Service handling RADIUS and having both types of EAP enabled and the identity
policy as well as the authorization is straight to the same target and level of access.
Cheers
-------------------------------------------------------------------------------------------------------------------------
Please Don't Forget to rate correct answers
02-28-2013 09:41 AM
02-28-2013 09:42 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide