cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

294
Views
0
Helpful
1
Replies
Beginner

Cisco ISE deployment - internal user error

Hello Community,

we use Cisco ISE 2.2.

We have the problem that our created internal are in ISE deployment are function for ISE01, but ISE02 Authentication failed,

ISE_INT_USER.PNG

 

The ISE01 is the Primary. Internal authentication passed. ISE02 is the Secondary. Authentication failed. In my opinion the Primary sync all Information to the secondary, so the internal database should be the same.

 

Did anybody know this effect?

 

Marco

Everyone's tags (1)
1 REPLY 1
Cisco Employee

Re: Cisco ISE deployment - internal user error

Please check the deployment page and ensure they are in-sync. It would be good to perform a manual sync. If that still does not resolve the issue, de-register the 2nd ISE node to check the policies. Afterwards, re-register it back to the deployment.