Showing results for 
Search instead for 
Did you mean: 

Who Me Too'd this topic

802.1x and ATA

Level 1
Level 1

hello Team,

I am trying to configure 802.1x on the 2560 switches. We have some ATAs connected. I configured the MAB on the switch and configured the windows IAS server with the ATA MAC as user/password. However; when i connect the ATA to the switch port it doesn't get the IP address. Is there a way to make this work? here's my switch port config.

interface FastEthernet0/29

switchport access vlan 17

switchport mode access

switchport voice vlan 3030

srr-queue bandwidth share 10 10 60 20

srr-queue bandwidth shape 10 0 0 0

priority-queue out

mls qos trust device cisco-phone

mls qos trust cos

auto qos voip cisco-phone

dot1x mac-auth-bypass

dot1x pae authenticator

dot1x port-control auto

dot1x timeout tx-period 10

dot1x timeout supp-timeout 10

dot1x reauthentication

dot1x guest-vlan 999

dot1x auth-fail vlan 999

dot1x auth-fail max-attempts 2

spanning-tree portfast

I appreciate your help.



Who Me Too'd this topic