03-24-2010 02:34 PM - edited 03-04-2019 07:55 AM
Hi,
Can I infer that based on the below the "Active" means that I have successful layer 3 connectivity to my BGP remote peer.
That is about it, correct?
gw1#show ip bgp summ
BGP router identifier 10.1.1.47, local AS number 64
BGP table version is 1, main routing table version 1
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.1.5.70 4 64 0 0 0 0 0 never Active
Solved! Go to Solution.