07-01-2010 08:05 PM
Hi all
Few questions about explicit path configuration.
1) next-hop IP address , point to next-hop interface ip or router-id(loopback) , which is prefer with? and why.
2) Attached the diagram, 3 example of explicit-path configuration. Like to know it isi possible and valid.
Explicit path <1> & <2> the purpose is the TE path must via either one of the "pink" WAN links. Are both configuration valid ?
<3> have same purpose, but mixed with interface & router-ID as next hop. Does this kind config work ?
<1>TE Tunnel Site-A PE1 to Site-B PE1
ip explicite-path name APE1-BPE1_1 enable
next-address 10.1.1.1
exclude-address 10.1.3.2
next-address 10.1.4.2
<2>TE Tunnel Site-A PE1 to Site-B PE1
ip explicite-path name APE1-BPE1_2 enable
next-address 10.1.1.1
exclude-address 10.1.3.2
<3>TE Tunnel Site-A PE1 to Site-B PE1
ip explicite-path name APE1-BPE1_3 enable
next-address 10.1.1.1
next-address
1.1.1.2