Hello,
I am trying to configure a PLAR connection for a analog station port door phone that I have. The problem I'm having is that sometimes, when the analog devices is pressed, the call goes to the right plar extension (extension 202), and at other times, it just rings some number. No phones will ring but the analog door phone will receive a ringing sound like it's trying to ring an extension, but it just rings forever without ringing any single phone!
Here's my configuration for the analog port:
voice-port 0/0/2
no supervisory disconnect lcfo
timeouts call-disconnect 0
timeouts ringing infinity
timeouts power-denial 1200
connection plar 202
station-id number 302
caller-id enable
The configuration for the dial-peer:
dial-peer voice 3 pots
destination-pattern 303
port 0/0/2
This boggles my mind! It's like the phone is ringing some phantom extension! Has anyone ever had this issue? This also happens with I hook up an analog telephone to the port (just to rule out the doorphone).
