We are having some problems after replacing one of the supervisors in our Nexus 7000 chassis.
We have replaced the supervisor in module-5 for a new one because of a problem with the old one.
After that, the module has auto-downloaded the new 5.1.1 images from the supervisor in module-6 and in we have rebooted the module 5. The "show install al status" confirmed that and invite us to reboot manually the module-5 supervisor.
After booting up, the module stay in "powered-up" status but did not become online, neither we can see any information about it through cli in the active supervisor, nor serial number, nor model or software version, but yes, we can show its bootflash with the actual version of the images and with the old one version 4.0.4.
With the console cable in the module-5, we saw it was booting with the appropriate version 5.1.1 and everythis was going correct.
We have upgraded the EPLD image in module 5 also.
We also have introduced the command "no poweroff module 5" but the module-5 was up and running, but not online.
Any idea?
Kind regards
