11-21-2010 09:15 AM - edited 03-10-2019 05:35 PM
I just installed a Cisco 5508 WLC on our network. I have the Management IP in the management VLAN and on the controller I set it up "untagged". WLC has two ports connected to a Cisco 4507 switch in the port-channel config.
I can ping the controller from the network fine, I can ping the TACACS server from the controller. I have the priority setup as "TACACS+, LOCAL". However when I try to log into the WLC and look at the debug it shows that I am Authenticating and that is about it, For some reason Authorization traffic is not passing. Using wireshark I have confirmed that the request is coming from the Management IP Interface.
I have followed the instructions from this link:
http://www.cisco.com/en/US/customer/docs/wireless/controller/5.0/configuration/guide/c5sol.html
Any ideas?
Solved! Go to Solution.