cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Not enough DSP resources available to configure pri-group on controller E1

nixonlawbi
Level 1
Level 1

Dear Gurus,

I'm adding a second VWIC2-2MFT-T1/E1 card and was unable to config "pri-group timeslots 1-31" on the new controller. It complained "Not enough DSP resources available to configure pri-group on controller E1". That's weird because I had 3 x PVDM-2 64 plugged in the C3825 router. Would be really appreciate your help. Thanks!!

card type e1 0 0
card type e1 1 0

voice-card 0
dspfarm
dsp services dspfarm

controller E1 0/0/0

framing NO-CRC4
pri-group timeslots 1-31
!


controller E1 0/0/1
framing NO-CRC4
pri-group timeslots 1-31
!


controller E1 1/0/0
framing NO-CRC4
!
controller E1 1/0/1

SHANRSHA02#sh inv
NAME: "3825 chassis", DESCR: "3825 chassis"
PID: CISCO3825         , VID: V05 , SN:

NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1"
PID: VWIC2-2MFT-T1/E1  , VID: V01 , SN:

NAME: "Two-Port Fast Ethernet High Speed WAN Interface Card on Slot 0 SubSlot 1", DESCR: "Two-Port Fast Ethernet High Speed WAN Interface Card"
PID: HWIC-2FE          , VID: V01 , SN:

NAME: "WAN Interface Card - Serial 2T on Slot 0 SubSlot 2", DESCR: "WAN Interface Card - Serial 2T"
PID: WIC-2T=           , VID: 1.0, SN:

NAME: "2nd generation four port FXO voice interface daughtercard on Slot 0 SubSlot 3", DESCR: "2nd generation four port FXO voice interface daughtercard"
PID: VIC2-4FXO         , VID: V01 , SN:

NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64          , VID: V01 , SN:

NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 5", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64          , VID: V01 , SN:

NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 6", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64          , VID: V01 , SN:

NAME: "FastEthernet/WAN V2 on Slot 1", DESCR: "FastEthernet/WAN V2"
PID: NM-2FE2W-V2=      , VID: V01 , SN:

NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 1 SubSlot 0", DESCR: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1"
PID: VWIC2-2MFT-T1/E1  , VID: V01 , SN:

Who Me Too'd this topic