cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

error %SMC-2-BAD_ID_HW on Cisco 871

lexxa7777
Level 1
Level 1

Hello

I've got 871 router

The was c870-advsecurityk9-mz.123-8.YI2.bin  inside. After I upgraded IOS to c870-advsecurityk9-mz.124-9.T7.bin and reload, 871 dorp to ROMMON with strange error

__________________________________________________________________________

Receiving c870-advsecurityk9-mz.124-9.T7.bin from 192.168.0.1 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
File reception completed.
Launching
Self decompressing the image : ########################################################################################## [OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706

Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.4(9)T7, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 10-Jan-08 20:55 by prod_rel_team
Image text-base: 0x8002008C, data-base: 0x817D8298


Queued messages:
*Mar  1 00:00:10.227: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Mar  1 00:00:10.207: %SMC-2-BAD_ID_HW: Failed Identification Test in 0/-1/-1 [1/0]

       The module in 0/-1/-1 in this router may not be a genuine
       Cisco product.  Cisco warranties and support programs only
       apply to genuine Cisco products.  If Cisco determines that
       your insertion of non-Cisco memory, WIC cards, AIM cards,
       Network Modules, SPA cards, GBICs or other modules into a
       Cisco product is the cause of a support issue, Cisco may
       deny support under your warranty or under a Cisco support
       program such as SmartNet.


System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.

C870 series (Board ID: 3-148) platform with 131072 Kbytes of main memory

rommon 1 >

__________________________________________________________________________

I was trying to

1) format flash: (many times

2) upload different 12.4T  IOS'es

noting help, every time after reload 871 drops to rommon

I did some googling but nothing interesting was found.

may be it's related to cookie problem but thera no instruction how to fix it

The only way to upload back c870-advsecurityk9-mz.123-8.YI2.bin.

871 starts normally when c870-advsecurityk9-mz.123-8.YI2.bin. inside but it's VERY old IOS and not stable enough.

/lexxa

Who Me Too'd this topic