Who Me Too'd this topic

I am trying to upgrade the firmware of SLM224P from 1.0 to 2.0 but it is not possible. I am getting the following error:

Upgrade/Backup Firmware/Language

Transfer Method: via TFTP via HTTP Save Action: Upgrade Backup File Type: Firmware Image Boot Code Language File Server Definition: By IP address By name IP Version: Version 6 Version 4 IPv6 Address Type: Link Local Global Link Local Interface: None TFTP Server IP Address/Name: Source File Name: (0/160 Characters Used) Destination File Name: (0/160 Characters Used) Transfer Method: via TFTP via HTTP Save Action: Upgrade Backup File Type: Firmware Image Boot Code Language File File Name: The firmware is upgraded to the inactive image file. You must activate the firmware using the "Active Image" page.

Bytes Transferred: 0 Status: Copy failed Error Message: Copy: Illegal software format

Here is some system info:

SF 200-24P 24-Port 10/100 PoE Smart Switch

PID VID: SLM224PT V01

I downloaded the firmware from this link: http://www.cisco.com/cisco/software/release.html?mdfid=282414086&softwareid=282463182&release=2.0.0.10&relind=AVAILABLE&rellifecycle=&reltype=latest&i=rm

What am I doing wrong?

Screenshot