10-21-2011 03:27 PM - last edited on 03-25-2019 09:43 PM by ciscomoderator
Hello guys,
I have a Cisco 7962 IP Phone to register with Cisco CME 8.6, i have uploaded the IP Phone files required as per the compatibility matrix of Cisco cme 8.6, i have added the load command inder telephony-service as it is an SCCP IP Phone.
The IP Phone was registered before with a Cisco CUCM 8.1 and working fine.
After issuing the debug tftp events, debug tftp packets, debug ephone detail, i have recieved the below debug:
Oct 21 22:01:05.296: TFTP: Server request for port 51046, socket_id 0x3029DFD8 for process 249
Oct 21 22:01:05.296: TFTP: read request from host 10.200.102.36(51046) via GigabitEthernet0/1.3
Oct 21 22:01:05.296: TFTP: Looking for CTLSEP203706170DF8.tlv
Oct 21 22:01:05.296: TFTP: Sending error 1 No such file
Oct 21 22:01:05.340: TFTP: Server request for port 51081, socket_id 0x3029DFD8 for process 249
Oct 21 22:01:05.340: TFTP: read request from host 10.200.102.36(51081) via GigabitEthernet0/1.3
Oct 21 22:01:05.340: TFTP: Looking for ITLSEP203706170DF8.tlv
Oct 21 22:01:05.340: TFTP: Sending error 1 No such file
Oct 21 22:01:05.396: TFTP: Server request for port 50730, socket_id 0x3029DFD8 for process 249
Oct 21 22:01:05.396: TFTP: read request from host 10.200.102.36(50730) via GigabitEthernet0/1.3
Oct 21 22:01:05.396: TFTP: Looking for ITLFile.tlv
Oct 21 22:01:05.396: TFTP: Sending error 1 No such file
Oct 21 22:01:05.564: TFTP: Server request for port 49962, socket_id 0x3029DFD8 for process 249
Oct 21 22:01:05.564: TFTP: read request from host 10.200.102.36(49962) via GigabitEthernet0/1.3
Oct 21 22:01:05.564: TFTP: Looking for SEP203706170DF8.cnf.xml.sgn
Oct 21 22:01:05.564: TFTP: Sending error 1 No such file
Oct 21 22:01:05.668: TFTP: Server request for port 52779, socket_id 0x3029DFD8 for process 249
Oct 21 22:01:05.668: TFTP: read request from host 10.200.102.36(52779) via GigabitEthernet0/1.3
Oct 21 22:01:05.668: TFTP: Looking for XMLDefault.cnf.xml.sgn
Oct 21 22:01:05.668: TFTP: Sending error 1 No such file
No requests are being recieved for an unsigned file, only request for signed file are being recieved.
1- Can we creat a signed XMLDefault file or a signed config file and upload to the CME?
IP Phone Files loaded:
tftp-server flash:apps42.9-1-1TH1-16.sbn
tftp-server flash:cnu42.9-1-1TH1-16.sbn
tftp-server flash:cvm42sccp.9-1-1TH1-16.sbn
tftp-server flash:dsp42.9-1-1TH1-16.sbn
tftp-server flash:jar42sccp.9-1-1TH1-16.sbn
tftp-server flash:SCCP42.9-1-1SR1S.loads
tftp-server flash:term42.default.loads
tftp-server flash:term62.default.loads
Regards,