10-23-2011 03:28 PM
I've seen lots of posts from people having problems routing traffic between two vlans with some complicated examples. Can anyone post a simple step-by-step example for an SG300 switch (in layer 3 mode) to configure two vlans and sending traffic between the two vlans without an external router?
VLAN1 10.10.10.0
VLAN2 10.10.20.0
I've tried to do this through the GUI and can't seem to make it work. It seems like it should be very simple, so maybe I'm missing something in the GUI.
Solved! Go to Solution.