Hello,
we have a CUCM 8.6.1.20000-1, and a VG (a Cisco 2921 with IOS 15.1(4)M1); the router has some E1s connected to a PBX.
We would like to get QSIG between CUCM and PBX.
Which protocol can we use between CUCM and VG to get QSIG? MGCP, H.323, or SIP?
How do we have to configure the CUCM and the VG to get QSIG?
Do you have some configuration examples for the various protocols?
TIA and regards.
