05-02-2012 05:41 AM
Hello!
I want to upgrade a Catalyst 3560-48PS to the last IOS.
I get an errormessage stating that there is insufficient space in flash: I have deleted all files in flash - but I still get the same error message. According to the documentation there should be enough memory. Messages are pasted below.
What am I missing?
Regards,
Torleif
Switch#dir
Directory of flash:/
No files in directory
15998976 bytes total (15997952 bytes free)
Switch#archive download-sw tftp://192.168.9.13/c3560-ipservicesk9-tar.122-55.SE.tar
Loading c3560-ipservicesk9-tar.122-55.SE.tar from 192.168.9.13 (via Vlan9): !!!!!!!
[OK - 15964160 bytes]
Loading c3560-ipservicesk9-tar.122-55.SE.tar from 192.168.9.13 (via Vlan9): !!!!!!!!
examining image...
extracting info (109 bytes)
extracting c3560-ipservicesk9-mz.122-55.SE/info (519 bytes)
extracting info (109 bytes)
System Type: 0x00000000
Ios Image File Size: 0x00C19A00
Total Image File Size: 0x00F37200
Minimum Dram required: 0x08000000
Image Suffix: ipservicesk9-122-55.SE
Image Directory: c3560-ipservicesk9-mz.122-55.SE
Image Name: c3560-ipservicesk9-mz.122-55.SE.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
Error: There is insufficient space in flash: to install the required
Error: image. Clean up some old images, and try again.
Switch#
Solved! Go to Solution.