HI
I am trying to set up a Wireless network a WLC hosted on an SRE module in a 2911 router.
I think i have most of my bases covered but there is still one problem.
My LAP1131AG AP's won't join the controller, on the AP im am seeing this:
Translating "CISCO-LWAPP-CONTROLLER.test.local"...domain server (192.168.250.10) [OK]
*Mar 1 00:00:46.720: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Jul 10 11:16:16.027: LWAPP_CLIENT_ERROR_DEBUG: spamGetAndVerifyCertMac: Invalid Generic MAC 000b85236dc0 in cert!
*Jul 10 11:16:16.027: LWAPP_CLIENT_ERROR_DEBUG: spamDecodeJoinReply : Certificate is not valid
*Jul 10 11:16:16.027: LWAPP_CLIENT_ERROR_DEBUG: Unable to decode join reply
*Jul 10 11:16:20.914: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response
*Jul 10 11:16:20.914: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
*Jul 10 11:16:20.940: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET JOIN RESPONSE.
*Jul 10 11:16:20.940: %LWAPP-5-CHANGED: LWAPP changed state to DOWN
And on the Controller side it looks like this: (Debug Capwap enable)
*spamReceiveTask: Jul 10 12:33:05.914: 70:81:05:b9:7e:90 Received LWAPP JOIN REQUEST from AP 70:81:05:b9:7e:90 to 28:94:0f:ef:41:20 on port '1'
*spamReceiveTask: Jul 10 12:33:05.914: Could not find BoardDataPayload
*spamReceiveTask: Jul 10 12:33:05.918: 70:81:05:b9:7e:90 AP AP7081.05b9.7e90: txNonce 00:00:00:00:00:00 rxNonce 00:00:00:00:00:00
*spamReceiveTask: Jul 10 12:33:05.918: 70:81:05:b9:7e:90 LWAPP Join Request MTU path from AP 70:81:05:b9:7e:90 is 1500, remote debug mode is 0
*spamReceiveTask: Jul 10 12:33:05.998: 70:81:05:b9:7e:90 Successful transmission of LWAPP Join Reply to AP 70:81:05:b9:7e:90
*spamReceiveTask: Jul 10 12:33:05.998: 70:81:05:b9:7e:90 spam_lrad.c:2012 - Operation State 0 ===> 4
*spamReceiveTask: Jul 10 12:33:05.914: 70:81:05:b9:7e:90 Received LWAPP JOIN REQUEST from AP 70:81:05:b9:7e:90 to 28:94:0f:ef:41:20 on port '1'
*spamReceiveTask: Jul 10 12:33:05.914: Could not find BoardDataPayload
*spamReceiveTask: Jul 10 12:33:05.918: 70:81:05:b9:7e:90 AP AP7081.05b9.7e90: txNonce 00:00:00:00:00:00 rxNonce 00:00:00:00:00:00
*spamReceiveTask: Jul 10 12:33:05.918: 70:81:05:b9:7e:90 LWAPP Join Request MTU path from AP 70:81:05:b9:7e:90 is 1500, remote debug mode is 0
*spamReceiveTask: Jul 10 12:33:05.998: 70:81:05:b9:7e:90 Successful transmission of LWAPP Join Reply to AP 70:81:05:b9:7e:90
*spamReceiveTask: Jul 10 12:33:05.998: 70:81:05:b9:7e:90 spam_lrad.c:2012 - Operation State 0 ===> 4
I have che checked that the WLC time is with in AP cert Validity time, and i have tried with a LAP1142 AP's wich joined fine.
The LAP1131AG is using LWAP and the LAP1142 AP is using CAPWAP, could LWAP be a problem ?
This Document is stating under table 3 that the Controller supports CAPWAP http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps9798/ps11716/data_sheet_c78-648142.pdf
But to my knowledge an LWAP AP schould be able to join a CAPWAP WLC, or am i wrong here?
Hope somebody can help me
Best Regards Jens W
