cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Very simple 1841 PPPoE config

Kim Holburn
Level 1
Level 1

I'm trying to get a PPPoE config working on an 1841.  Running c1841-advsecurityk9-mz.124-3i.bin . I tried c1841-advsecurityk9-mz.151-4.M4.bin but it has even less protocol options.

I used a walkthrough but it suggests the following fragment which doesn't work because there is no "protocol ppoe" command available on my system.  Perhaps there is a simpler way to do this?  I tried c1841-broadband-mz.151-4.M4.bin but it doesn't seem to have ssh available.

vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
exit

My config looks something like this:

version 12.4
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service compress-config
service sequence-numbers
!
hostname myhostname
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5 xxxxxxxx
!
aaa new-model
!
!
aaa authentication login local_auth local
aaa authorization exec default local
!
aaa session-id common
!
resource policy
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip cef
!
!
ip domain name mydomainname.com
ip ssh time-out 60
ip ssh authentication-retries 2
ip ssh version 2
vpdn enable
!
!
interface FastEthernet0/0
description ADSL WAN connection
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no ip mroute-cache
duplex auto
speed auto
pppoe enable
no cdp enable
!
interface FastEthernet0/1
ip address 10.1.1.5 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
no ip mroute-cache
duplex auto
speed auto
no cdp enable
!
!
interface Vlan1
no ip address
!
interface Dialer1
description ADSL WAN Dialer
ip address negotiated
no ip unreachables
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
no ip mroute-cache
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname myname@myisp
ppp chap password d xxxxxxxx
ppp pap sent-username myname@myisp password d xxxxxxxx
ppp ipcp route default
!
ip classless
!
no ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 10 interface Dialer1 overload
ip nat inside source static 10.1.1.6 15.14.13.12
!
logging trap debugging
logging facility local6
access-list 10 permit 10.1.0.0 0.0.255.255
access-list 23 permit 10.1.0.0 0.0.255.255
dialer-list 1 protocol ip permit
no cdp run
!

Who Me Too'd this topic