Hello,
I 've got a problem on an AP1142N. It joins correctly its controller (5508 WLC) but one of his radio (Dot11Radio1) won't go up :
#show cdp interface
Dot11Radio1 is reset, line protocol is down
Encapsulation ARPA
Sending CDP packets every 60 seconds
Holdtime is 180 seconds
Here's what I have in my log file :
*Oct 19 11:13:20.536: %DOT11-2-TX_PWR_TIMO: Interface Dot11Radio1, Timed out waiting for fw to clear txp_pndg flag
*Oct 19 11:13:21.036: %DOT11-2-TX_PWR_TIMO: Interface Dot11Radio1, Timed out waiting for fw to clear txp_pndg flag
Is it an hardware problem?
Regards,
Eric
