08-30-2012 10:12 AM - edited 03-19-2019 05:27 AM
Hi All,
I am trying to integrate CUCM with the Avaya PBX that is runnin on the below server and gateway.
Server :s8720
Gateway :G650.
I am not familiar with the Avaya system ,but we are trying to integrate it with CUCM 8.6 using the H323 trunk.I used the below link to setup the trunk and I am having issues with calls going from CUCM to Avaya.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/technote_h323trunk_ext.pdf (This document uses CUCM 4.X has as an example and this is what I could find in Cisco's Website)
At the same time calls from Avaya to CUCM works fine.Just wanted to know if anyone here has ran into this issue and looking for inputs to resolve it.
Thanks in advance,
Simah.