Some help please.
I have a bit of a problem in that the DFC for the ES+20G3C line card I have tried to install is incompatible with our 7606 PFC
Sep 6 17:55:52: %SYS-6-EXIT_CONFIG: User psadmin has exited tty session 1(10.64.1.148)
Sep 6 18:00:22: %C6KENV-SP-2-DFCMISMATCHMINOR: Module 2 DFC installed is incompatible with system operating mode. Power denied.
To enable Module 2 DFC, the system must be reset.
WARNING: Any system reset will change the system operating mode which can result in degradation of system performance. To eliminate this from occurring, remove Module 2 DFC or replace with a system compatible DFC.
We are running a Cisco 7606 with a SUP7203BXL. The line card looks like a 3C
I must have misread the docs - http://www.cisco.com/en/US/prod/collateral/routers/ps368/data_sheet_c78-49152.html , but I was sure this card was compatible. The cards only seem to come in 2 flavours, either 3C or 3CXL. Is the 3CXL the card I need? What are my options?
