cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Using 10/half on a gigabit port not working

Marty O'Connor
Level 1
Level 1

We recently upgraded the switch to which an old security device was connected.  It worked fine on the old switch's FastEthernet port, which was configured for speed 10 and duplex half, as that is what the device required. The new switch is a 3560X with all Gigabit ports, but the security device's port, also configured with speed 10 and duplex half, does not connect properly.

As a temporary test, we daisychained another switch that has FastEthernet ports, and the security device works again.

Is there anything else that needs to be added to the configuration, when using Gigabit ports at 10/half?

Who Me Too'd this topic